Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Equipment Overview:
HUT305D microcomputer controlled electro-hydraulic servo universal testing machine has the characteristics of compact structure, simple and easy to use, can be applied to the maximum load of 300kN metal bar, plate tensile test, steel bar tensile test, high strength bolt, high hardness metal material tensile bending and compression test。It has three control modes of load, deformation and displacement and can realize smooth switching, and can realize equal rate load control, equal rate deformation control and equal rate displacement control。
The test software can automatically collect and process test data, display test data and stress-strain curve, load-deformation curve, load-time curve and other test curves in real time, and can save, output and print test reports and data required by users。
Relevant standards:
GB/T 2611 "General Technical Requirements for Testing Machine"
GB/T 16826 "Electro-hydraulic Servo universal Testing Machine"
JJG 1063 "Electro-hydraulic Servo Universal Testing Machine"
GB/T 228.1 "Metal materials tensile test - Part 1: Test method at room temperature"
Technical parameters:
Specification and model | HUT305D |
Maximum load (kN) | 300 |
Accuracy class of testing machine | 0.5级 |
Relative error of test force indication value | ±0.5%以内 |
Test force measurement range | 1%-100% FS (full ungraded) |
Deformation (extensometer) measuring range | 1%-100%FS |
Relative error of deformation indication | ±0.5% |
Deformation resolution | 1/500000 of the maximum deformation |
Maximum piston moving speed (mm/min) | 340 |
Piston descending maximum speed (mm/min) | 1000 |
Test force loading rate range | 0.02%-2%FS/s |
Effective distance between columns (mm) | 500 |
Maximum distance between drawing jaws (mm) | 600 |
Maximum compression space (mm) | 390 |
Holding range of round specimen holder (mm) | Φ10~Φ32 |
Clamping thickness of plate specimen holder (mm) | 2~25 |
Pressure plate size (mm) | ɸ120 |
Piston stroke (mm) | 600 |
Main machine dimensions (L x W x H, mm) | 800x600x2720 |
Oil source dimensions (L x W x H, mm) | 600x880x925 |
电源 | Three-phase five-wire system 380VAC± 10%, 50Hz,5.5kW |
Weight (kg) | 2000(main engine)+400 (oil source) |
The test machine is suitable for tensile bending and compression test of metal bar, plate, rebar, steel strand, high strength bolt and high hardness metal material。Construction engineering inspection station in Anhui province used the equipment。
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763