Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Equipment overview
1000kN robot automatic hydraulic tensile testing machine is composed of hydraulic universal testing machine, with automatic extensometer, weighing length measuring device, ABB robot, sample frame, control system, software, etc. The fixture of the testing machine is a hydraulic flat push clamping fixture。
1000kN robot automatic hydraulic tensile testing machine is used for tensile test of batch bar samples, and is suitable for automatic measurement of tensile performance indicators of hot rolled ribbed bars。It is an ideal testing equipment for tensile test of batch bar samples by industrial and mining enterprises, scientific research institutes, universities, commodity inspection arbitration, technical supervision and other departments。
Technical parameter
Technical project | Technical parameter | |
主机 | Maximum test force | 1000kN |
Overload protection | 120% maximum test force | |
accuracy level | 0.5级(0.5%FS to 100%FS) | |
Test force indication error | ±0.5%以内 | |
Test force resolution | Maximum deformation of 1/±500000 FS | |
Driving mode | Hydraulic + servo valve | |
Maximum speed of piston rise | 190mm/min | |
Maximum speed of piston descent | 300mm/min | |
Maximum tension jaw spacing (mm) | 700mm | |
Circle specimen clamping diameter range | Φ12-Φ40 | |
Sample length | 500-700mm | |
Main engine dimensions | 940×720×3290 | |
Oil source dimensions | 900×850×1900 | |
功率 | 9kW | |
重量 | 5000kg | |
ABB Robot (IRB4600) | 负载 | 60kg |
Scope of work | 2.05m | |
Repeated positioning accuracy | 0.06mm | |
Fully automatic extensometer | Working mode | Contact type |
Range of scale | 15-205mm | |
Resolving power | 0.2μm | |
Indication error | It changes to 0-0.For 3mm, ≤0.0015mm Deformation to 0.3-80mm, ≤0.5% | |
Clamping diameter range | Bar Φ2-40mm | |
Deformation measurement accuracy | 0.5级 | |
Hydraulic clamp | Clamping mode | Double thrust |
Maximum clamping force | 1200kN | |
Clip hardness | HRC60 | |
Opening width | 60mm | |
Centering accuracy | 0.2mm | |
Circle specimen clamping diameter range | Φ12-Φ40 | |
Specimen holder | Sample capacity | 90根 |
Sample length | 500-700mm | |
Weighing length measuring device | Weighing range | 0.1kg-25kg |
Relative error of indication | The value is ±0.5%以内 | |
Length measurement accuracy | ±0.5mm | |
Work efficiency | About 22 sticks/hour | |
System footprint | About 4200×4200mm | |
Security protection | Including extension meter anti-pressure, safety alarm, safety protection, overload protection and other equipment safety protection devices |
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763